| P1(K-28) |
Micro-explosives induced underwater shock waves for medical applications
S. H. R. Hosseini, Y. Kohno, and K. Takayama |
| P2(N-50) |
Degradation of waste water （red water） from the manufacture of TNT
T. Kitayama, S. Sano, M. Matsumoto , T. Nagaishi, N. Nagayasu, and
Y. Harada |
| P3(S-86) |
Theoretical Studies of the Structure and Thermodynamic Properties of Two Crystalline Forms of NTO
S. E. Shahraki, M. H. Keshavarzb, and S. B. Gharehghanic |
| P4(S-83) |
Theoretical studies of the molecular geometry structure and thermodynamic properties of urea derivatives, as stabilizers for gun powders and propellants
S. E. Shahraki and S. B. Gharehghani |
| P5(Y-90) |
Large area porous silicon-nitrate salt (PSNS) nano-composite: preparation and explosion
W. Yu, H. Huang, H. Li, J. Li, F. Nie, X. Li, S. Zhang, and J. Dun |
| P6(N-78) |
The thermal reactivity of ammonium nitrate’s explosives under high pressure
H. Imazato, M. Akiyoshi, and H. Nakamura |
| P7(D-10) |
Investigation on the properties for a compound of high nitrogen content
D. Ding, T. Kazumi, and K. Matsuda |
| P8(S-91) |
Development and field-blasting tests of water-resistant granular explosive
H. Sugihara, K. Noguchi, K. Yoshihara, and Y. Sato |
| P9(T-92) |
Developments and field tests of granular emulsion explosives
T. Taguchi, S. Sasaki, T. Ariki, and Y. Kimura |
| P10(S-59) |
The influence of burning rate catalyst on the stabilization of composite solid propellant
H. Salehi |
| P11(S-60) |
An investigation of polyether-urethane based composite propellant curing and aging
H. Salehi |
| P12(P-55) |
Utilization of dynamic mechanical analysis for characterization of solid rocket propellants
J. Pachman and J. Selesovsky |
| P13(F-87) |
An experimental study on the energetic hydrazone binder for solid rocket propellant
K. Fujimura |
| P14(K-85) |
Stabilization of cellulose nitrate by diphenyl amine and oxidation inhibitors
K. Katoh, L. Le, M. Kumasaki, Y. Wada, and M. Arai |
| P15(M-36) |
Crystal shape control of RDX using supercritical carbon dioxide
S. Matsuzaki, T. Okitsu, K. Ouchi, K. Otake, T. Matsunaga, and
S. Fujiwara |
| P16(G-89) |
UV-VIS absorption spectra of energetic materials under high pressures
N. Goto, H. Yamawaki, K. Wakabayashi, Y. Nakayama, M. Yoshida,
and M. Koshi |
| P17(I-73) |
A study on shock sensitivity of an emulsion explosive by a sand gap test
K. Ishikawa, T. Abe, S. Kubota, K. Wakabayashi, T. Matsumura,
Y. Nakayama,
and M. Yoshida |
| P18(M-37) |
Thermal stability of triacetone triperoxide
R. Matyas and J. Pachman |
| P19(N-79) |
Hazard evaluation of zirconium and potassium perchlorate mixture
H. Nakamura, A. Uchino, and M. Akiyoshi |
| P20(P-11) |
Thermal safety of waste explosive in HMX manufacturing process
D. J. Peng and C. M. Chang |
| P21(A-1) |
Luminescence of PETN crystals under initiation by a nanosecond electron beam
B. P. Aduev, G. M. Belokurov, S. S. Grechin, E. V. Tupitsin, and
V. N. Shvayko |
| P22(A-2) |
A paired vacancy model of heavy metal azide initiation
Y. A. Zakharov, E. D. Aluker, B. P. Aduev, and A. G. Krechetov |
| P23(A-3) |
Spatial localization of pre-explosive luminescence in heavy metal azides
Y. A. Zakharov, E. D. Aluker, B. P. Aduev, A. G. Krechetov, and
A. Y. Mitrofanov |
| P24(K-21) |
Application of the overdriven detonation effects in high density explosives
H. Kato, M. Shioda, T. Okitsu, K. Murata, Y. Kato, T. Hamada, and
S. Itoh |
| P25(K-27) |
Stationary conversion regimes with fracture in the reaction zone and their stability
A. G. Knyazeva |
| P26(K-76) |
Combustion and explosion characteristics of ammonium nitrate and activated carbon mixtures
H. Kobayashi, A. Miyake, Y. Wada, Y. Ogata, S. Kubota, and T. Ogawa |
| P27(K-26) |
|
| P28(M-46) |
Detonation front curvature of non-ideal explosive ANFO
A. Miyake, Y. Ohtagaki, T. Abe, Y. Wada, Y. Ogata, S. Kubota,
Y. Nakayama, and T. Ogawa |
| P29(K-22) |
Numerical study on underwater explosion simulation surrounded by an iron wall using smoothed particle hydrodynamics
W. Kobashi and A. Matsuo |
| P30(O-51) |
Propagation of the blast vibration caused by gas explosion
Y. Ogata, S. Kubota, and Y. Wada |
| P31(K-23) |
Behavior of cylindrical rock specimen under dynamic loads
S. Kubota, Y. Ogata, and Y. Wada, G. M. Simangunsong, H. Shimada, and K. Matsui |
| P32(H-17) |
Examination of the break-up model for explosion break-up analysis
H. Hata, T. Hiroe, and K. Fujiwara |
| P33(M-43) |
Improvement on penetration of linear shaped charges
H. Miyoshi, H. Ohba, H. Kitamura, T. Inoue, and T. Hiroe |
| P34(C-8) |
Measurement on mean size of liquid droplets of FAE dispersed by high explosive
J. Chen, G. Wu, Z. Han, and Q. Cai |
| P35(I-19) |
Glass crushing for recycling using underwater shock wave
H. Iyama, T. Watanabe, and S. Itoh |
| P36(N-48) |
Constitutive relation for mortar and concrete compatible with plane impact data
K. Nagayama and S. Kubota |
| P37(I-88) |
Phase transition of sulfur during the nano-shock compression
M. Izumo, M. Sakai, S. Ye, and M. Koshi |
| P38(H-72) |
Characteristics of the surface coating layer obtained by shock-induced reaction synthesis through underwater shock compression
K. Hokamoto, S. H. Lee, J. S. Lee, S. Tanaka, A. Mori, R. Tomoshige,
and M. Fujita |
| P39(M-34) |
The effect of experimental parameters on the explosive welding of Ti and stainless steel
P. Manikandan, K. Hokamoto, K. Raghukandan, A. Chiba, and
A. A. Deribas |
| P40(P-57) |
Compressive loading of the die in explosive forming
R. Pruemmer |
| P41(S-58) |
Parallel implementation of a CIP eulerian code for explosion phenomena
T. Saburi, S. Kubota, S. Uchida, and M. Yoshida |
| P42(K-75) |
Influence of the nitric acid concentration on the thermal hazard of hydrazine/nitric acid mixtures
A. Kimura, A. Miyake, Y. Satoh, and T. Ogawa |
| P43(O-52) |
UN classification tests of fireworks and concrete cracker
K. Okada, H. Fujiwara, M. Akiyoshi, T. Matsunaga, M. Iida, and
S. Fujiwara |
| P44(C-93) |
Microscopic visualization in rock subjected to dynamic tensile loading by means of microfocus X-ray CT
S. H. Cho, Y. Ogata, S. Kubota, and K. Kaneko |
| P45(W-65) |
Relational information system for chemical accidents database (RISCAD) - case studies on explosives accidents -
Y. Wada, Y. Ogata, and T. Ogawa |
